Aerpro APUNIPL2 Steering Wheel Control Harness Patchlead Universal Patch Lead

The Aerpro APUNIPL2 SWC Patch Lead is designed to provide an interface between the steering wheel control output of your factory wiring loom and Aerpro Steering Wheel Control or Infodapter interface. It is suitable for use with aftermarket headunits which require a 3.5mm jack, single wire or 3-wire self-learning input.

Note:

Some vehicle and headunit combinations may require some connections between the patch lead and headunit to be hard wired.

This patch lead is compatible with most major brand head units. Please check aerpro.com for compatibility.

If used with a compatible Pioneer headunit it may be necessary to turn on this function in the headunit settings (please refer to the headunit manufacturers user manual to understand how to do this).

Features:

Designed to suit most aftermarket head units with steering wheel control capabilities

Compatible with 3.5mm jack, single wire and 3-wire self-learn head units

Compatible with all Aerpro Steering Wheel Control and Infodapter Interfaces

Simply connects between the Aerpro Interface and compatible aftermarket head unit

Specs:

Harness Type: SWC Patch Lead

Head Unit Compatibility: Most Aftermarket Head Units with Steering Wheel Control Capabilities

Interface Compatibility: Aerpro Steering Wheel Control and Infodapter Interfaces

Important Information:

Hard wire connection is required between the head unit wiring and this patch lead in some installations.

This patch lead is compatible with most major brand head units. Please check aerpro.com for compatibility.

If using with Pioneer head units, for your steering wheel controls to work with your Pioneer head unit you will need to turn this function on in the system menu (see head unit user manual).

Universal to Suit:

• Alpine
• Clarion
• JVC
• Kenwood
• LG
• Panasonic
• Philips
• Pioneer
• Sony
• Zenec
• Will suit headunits with self learning capabilities

PLEASE NOTE:

For your steering wheel controls to work with your Pioneer headunit you will need to turn this function on in the system menu (see headunit user manual)