Aerpro CHMB2C Steering Wheel Control Harness fits Citroen Mitsubishi Peugeot Various Model

The Aerpro CHMB2C is a steering wheel control (SWC) interface that can be paired with an Aerpro secondary ISO harness and SWC patch lead, each sold separately, to allow retention of your factory steering wheel controls when installing an aftermarket headunit in select Citroen, Mitsubishi and Peogeot models.

Suitable for most models without a premium OEM amplified sound system, the steering wheel control interfaces with the factory wiring loom of your vehicle, eliminating the need to cutting or modify your factory wiring loom in any way.

The CHMB2C also incorporates an OEM auxiliary retention solution, suitable for aftermarket headunits which feature a rear located auxiliary audio input.

Note:

Steering Wheel Control Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.

Aftermarket headunit must be SWC compatible and Steering Wheel Control Functions may vary from the OEM Functions.

Phone buttons on steering wheels do not support SONY aftermarket models - Answer Button functions as Mute and Hang Up Button functions as Source. Alpine, Clarion, Kenwood, Pioneer and Zenec headunits will support phone button. Some button assignments may change based on the specific vehicle and aftermarket headunit combination.

Not suitable for OEM amplified vehicles.

Features:

Allows you to upgrade to an aftermarket headunit whilst maintaining use of your factory steering wheel controls

Increases driver safety by allowing you to keep your hands on the steering wheel and eyes on the road

Supports OEM Phone Button when connected to compatible aftermarket bluetooth headunits

Voice Assistant Button support available with software update (please contact your Authorised Aerpro Dealer for update)

OEM AUX retention when connected to compatible aftermarket headunit with Rear RCA AUX input

Not suitable for OEM amplified vehicles

Specs:

Interface Type: ANALOGUE

Patch Lead Type: C

Phone Button Compatibity: Yes

Voice Assist Button Support: Yes

For Voice Assistant support the interface requires firmware version xx.3. To update the firmware please contact your Authorised Aerpro Dealer

If your steering wheel control does not have a Voice Assistant button, the answer button will function as voice support instead

Aftermarket headunit and phone must both support Voice Assistant for this feature to function

NOTES:

Aftermarket headunit must be SWC compatible.

SWC patch lead is also required to enable SWC (sold separately).

Not suitable for OEM amplified vehicles.

Phone buttons on steering wheels do not support SONY aftermarket models - Answer Button functions as Mute and Hang Up Button functions as Source. Alpine, Clarion, Kenwood, Pioneer and Zenec headunits will support phone button.

Supported Vehicles:

Citroen C4 Aircross Type B

Mitsubishi Lancer 2007-2013 CJ

Mitsubishi Lancer 2013 - 2017

Mitsubishi ASX 2010-2012 XA

Peugeot 4008 2012-2013

Mitsubishi Triton 2015 MN [GL, GLX, GLX-R]

Mitsubishi ASX 2012-2014 XB

Mitsubishi Challenger 2013-2015 PC

Mitsubishi Mirage 2012- LA

Mitsubishi Triton 2016-2018 MQ

Peugeot 4008 2014-

Mitsubishi Outlander 2007-2012 ZG, ZH

Mitsubishi ASX 2017-2019 XC

Mitsubishi Triton 2019- MR

Mitsubishi Pajero 2012-2019 NW, NX

Peugeot 4007 2009-2012

Mitsubishi ASX 2014-2016 XB

Mitsubishi Pajero Sport 2015-2019 QE